Product: Phottix Odin II TTL Flash Trigger Receiver Canon
Product: Phottix Odin II TTL Flash Trigger Receiver Canon

Phottix Odin II TTL Flash Trigger Receiver Canon

Stock code: #PT89072

($86 excl. GST)

  • $99
  • Add to cart

Phottix

Odin II

TTL Flash Trigger Receiver for Canon EOS


The Phottix Odin II TTL Flash Trigger Receiver adds wireless triggering and control to your Canon E-TTL / E-TTL II flash system. Equipped with a 2.4 GHz radio system, the Odin II receiver can be used to integrate shoe-mounted flashes and studio strobes into your setup and can be triggered by the original Odin receiver or Mitros+ flash at distances up to 100 m. It is also compatible with multi-system setups that can include the Odin TTL, Strato, and Strato II receivers as well as Mitros+, Indra360, and Indra 500 lights. New to the Odin II is an expansion of channels and the introduction of Digital ID which gives further control over channels 5-32 to eliminate interference with other systems.

TTL communication between the camera and flash makes automatic exposures simple, and manual power and zoom control dials offer precise adjustments to more advanced users. Using the five groups, users can also control different groups and flashes with varying settings as well as mix and match TTL and manual units. Adjust your settings using the large LCD screen and control buttons.

Additional features include both high-speed sync for TTL flashes as well as OverDrive Sync mode for manual studio strobes, making it possible to work at shutter speeds up to 1/8000 second. It is also possible to remotely control the modeling light of Indra TTL strobes as well as use an AF assist light when needed. A mini-USB port is included for firmware updates as well as a 3.5mm sync port and a 5 VDC power port.

Phottix

Odin II

TTL Flash Trigger Receiver for Canon EOS

Exposure Control Canon E-TTL / E-TTL II
Manual
Frequency 2.4 GHz
Range 100 m
Channels 32 with user-set Digital ID Channel 5-32
Groups 5 (A, B, C, D, E)
Ratio A:B
8:1 to 1:8 in 1/2 stop increments
Exposure Compensation ±3 stops in 1/3- or 1/2-stop increments
Manual Power Setting 1/1 to 1/128 in 1/3-stop increments
Flash Synchronization 1st curtain
High-speed sync at up to 1/8000 sec (TTL)
OverDrive sync at up to 1/8000 sec (manual, studio strobes)
Ports 1 x 3.5mm sync port
1 x Mini-USB port
Power Source 2 x AA alkaline or NiMH batteries
5 VDC
Dimensions 82 x 69 x 48 mm
Weight 92 g

@progearphoto - FOLLOW US ON INSTAGRAM

We love to see your photos! Hashtag #progearfeature for your chance to be featured