HPRC
4600W Wheeled Hard Case with Cubed Foam
Black
The HPRC 4600W Rolling Resin Case provides up to 24.1 x 24.1 x 13.6" of capacity and is designed to protect its contents from impacts, moisture, dirt, or corrosion. It's low-profile, built-in wheels, along with a single-stage extendable handle, allow for easy movement of heavy loads. For instances where this rolling case must be lifted off the ground, a large, ergonomic, carry handle is also provided. Utilizing a polypropylene, fiberglass, rubber, and stainless-steel construction, the HPRC 4600W Rolling Resin Case is ATA 300, IP67, STANAG 4280, and DS 81-41 complaint. When closed, this rolling case's interior is fully sealed from dust, as well as water from 5.9" to 3.3' deep, while providing long-lasting resistance to wear-and-tear.
While the extendable handle is retracted, the carry handle can also be folded downward, helping to reduce the amount of space occupied by the HPRC 4600W Rolling Resin Case whether it is placed upright, or on its base. Four, molded feet elevate the base, protecting it from wet and abrasive surfaces. While its lid faces upward, the rolling case's interior can be reached by opening the six latches along the lid. The base and lid are joined by a pair of heavy-duty hinges, while the latches' double-hinged design prevents the HPRC 4600W Rolling Resin Case from accidentally opening due to bumps or shocks when in transit.
Both the base and lid also include a pair of shackle eyelets that align when closing the HPRC 4600W Rolling Resin Case. Two separately available padlocks with 1/4" diameter shackles can then be installed along the handles for enhanced security. While closed, a built-in valve automatically equalizes air pressure between the interior and exterior of the rolling case. This pressure valve is water-resistant and further prevents the HPRC 4600W Rolling Resin Case from accidentally opening during air travel or when moving from areas of low altitude to high altitude.
An HPRC Cubed Foam Kit for the HPRC 4600W Rolling Resin Case is also provided. Once installed, the foam kit can be permanently modified to provide a custom fit for any equipment or valuables to be placed within the HPRC 4600W Rolling Resin Case. Aside from providing additional protection from external shocks, the HPRC Cubed Foam Kit for HPRC 4600W Rolling Resin Case also prevents damage among stored items by ensuring that they do not come into contact with each other. Additionally, the soft peaks of the foam kit's convoluted, egg-crate lid foam help maximize cushioning to the contours of items that come into the most contact with it.
Rolling case with up to 24.1 x 24.1 x 13.6" of capacity that is designed to protect its contents from impacts, moisture, dirt, or corrosion
Utilizes a polypropylene, fiberglass, rubber, and stainless-steel construction that is ATA 300, IP67, STANAG 4280, and DS 81-41 complaint
Fully sealed from dust, as well as water from 5.9" to 3.3' deep, while providing long-lasting resistance to wear-and-tear
Low-profile, built-in wheels, and single-stage extendable handle allow for easy movement of heavy loads
Ergonomic, carry handle for instances where the rolling case must be lifted off the ground
Carry handle folds away, reducing the amount of space occupied by the rolling case
Six, double-hinged latches prevent accidental opening due to bumps or shocks when in transit
Reinforced corners for enhanced protection from external shocks
Molded feet elevate the rolling case's base, protecting it from surface moisture and abrasions
Feet interlock with molded notches along the lid of another, closed HRPC 4600W Rolling Resin Case, allowing multiple HRPC 4600W Rolling Resin Cases to be safely stacked
Built-in, water-resistant pressure valve further prevents the rolling case from accidentally opening during air travel or when moving from areas of low altitude to high altitude
Accommodates up to two separately available padlocks with 1/4" diameter shackles for enhanced security
HPRC Cubed Foam Kit for HPRC 4600W Rolling Resin Case can be used to create a custom fit