Z 6II + Nikkor Z 24-70mm f/4 S
Full Frame Mirrorless Camera & Standard Zoom Kit
In this kit, the Nikon Z 6II is paired with Nikkor Z 24-70mm f.4 S standard zoom lens.
An all rounder mirrorless camera designed for impressive stills and video application, the Nikon Z6II is updated for more speed, more performance, and greater versatility whilst retaining the familiar Z6 form factor. Combining a 25.5MP BSI CMOS sensor and dual EXPEED 6 image processors, the Z 6II provides a wide ISO sensitivity range of 100 to 51200 that can be further extended to 50 to 204800 for working in a variety of lighting conditions and a faster continuous shooting rate of up to 14 fps at 24.5 MP for up to 124 consecutive frames or 12 fps in other focusing modes. In terms of video capabilities, high resolution video recording is possible at Ultra HD 4K 30p, up to Full HD 120p is supported for slow-motion output, and external recording gains 10-bit out along with N-Log and HLG (HDR) support are available. In-body 5-axis sensor-shift VR (Vibration Reduction) compensates for up to 5 stops of camera shake with all Z-type lenses to benefit handheld shooting and an Electronic VR function steadies handheld video recording. Previously available for photo applications only, the advanced phase-detect autofocus system utilising 273 points now avails the Eye and Face Detection for both humans and animals in Wide-Area AF modes for video recording as well. Additionally, the AF system permits focusing down to -4.5 EV, benefitting focusing in low-light. Widening the range of tools for expressing your creativity, the creative shooting modes have been updated with Multiple Exposure, 20 different Picture Control settings, and in-camera Timelapse recording. In addition, there is a Focus Shift mode that enables recording of up to 300 sequential frames with the focus position shifted between exposures for focus stacking applications.
The complementary physical design now features a new dual memory card slot interface to hold one CFexpress Type B card and one SD UHS-II card for more flexible storage. You can also switch the rotation direction of the focus ring on the lenses now to suit your use. Other than that, it retains familiar attributes of its predecessor: a large 3.2" 2.1m-dot tilting LCD touchscreen for bright and clear image playback and live view shooting, a 3.69m-dot OLED electronic finder with a high 0.80x magnification and flourine coating for easier cleaning; a dot-matrix OLED low energy display helps keep important camera settings handy. The built-in SnapBridge wireless connectivity can connect the camera to mobile devices via BLE (Bluetooth Low Energy) and Wi-Fi for image sharing and live view image display from the camera. It can also be used to remotely trigger the camera and update firmware easily. The robust body of the Z 6II is constructed from magnesium alloy and is both dust- and weather-resistant for working in difficult conditions and inclement weather.
Paired here with the Z 6II is the Nikkor Z 24-70mm f/4 S lens, a versatile standard zoom covering wide-angle to portrait length perspectives with a constant f/4 maximum aperture. Optically, the lens features one aspherical element as a unique aspherical extra-low dispersion element to greatly reduce a variety of aberrations and distortions for accurate colour rendering and improved sharpness. An application of Nano Crystal Coating is employed to minimise flare and ghosting for increased contrast in harsh lighting. Benefitting both still and video applications, a stepping aufocus (AF) motor is featured to deliver smooth and quiet autofocus performance.