Benro

FH100M3 Long Exposure Kit

Includes a Filter Holder Set, Filter Case, 4 Filters, 2 Stepdown Rings & an Additional Filter Frame

The FH100M3 Long Exposure Kit is put together exclusively here to meet your long exposure photography. It includes the Benro FH100 markIII Filter Holder kit, the FB100M2 Filter and Filter Holder Case, four filters (which includes a CPL), an additional filter frame, and two stepdown rings.

The Benro FH100 mkIII Filter Holder Kit is designed for fast and easy use with up to three filters plus one polariser. Sixteen magnets in the rotating ring of the holder holds the polariser filter firmly in place as well as permit fast removal of it. In addition, the polariser filter can be operated from either the rear or the side while the other filters are placed in front. Benro recommends using the 82mm or 95mm Benro CPL filters. The red rotary knob can be used to position gradient filters in the FR1015 filter frame quickly and accurately, and each gradient filter can be moved separately. Owing to the more outward placement of the guides on the Benro FH100M3, it is possible to capture stills with an extremely wide angle without vignetting, with the maximum wide angle dependent on the construction of the lens. The holder itself is easy attached by automatically clicking onto the lens ring. A blue rotary knob provide the means to fix or release the holder. When loosened, the holder can be removed efficiently by pulling the spring-loaded slide backwards. The filter holder set also includes two frames for filters of two different sizes: one FR1010 for a 100x100x2 mm filter and one FR1015 for a 100x150x2 mm filter.  A lens ring filter with 77mm thread and another one with 82mm thread are also supplied.

The Case for 100mm Filters and Holder from Benro is a filter bag designed for use with 100mm square filters. It offers separate compartments for up to eight filters in their frames: five 100x150mm graduated filters and three 100x100mm square filters. In addition, there is room to store your 100mm filter holder and a polarisation filter.

This Benro Hard Grad 0.6 ND filter is a 100x150mm 2 stop graduated neutral density filter with a hard transition from being transparent on one end to being light-stopping on the other. This makes it a good choice when working with a horizon line or scenes where there is a hard transition between sky and foreground.

This ND64 WMC 100x100mm Filter from Benro is a 6 stop neutral density long exposure filter designed to reduce all different wavelengths of light for an even 6 stop reduction in light. This allows your shutter speed to be slowed significantly, which is particularly useful when photographing water and tides, or when a dramatic effect is desired.

This ND1000 WMC 100x100mm Filter from Benro is a 10 stop neutral density long exposure filter designed to reduce all different wavelengths of light for an even 10 stop reduction in light. This allows your shutter speed to be slowed significantly, which is particularly useful when photographing water and tides, or when a dramatic effect is desired.

The MAMCPL95 95mm CPL from Benro is a magnetic circular polariser filter dedicated for use with the filter holders with a magnetic ring. Unlike standard CPL filters, this 95mm CPL does not have screw thread or a rotating front element, and the rotation is achieved by a mechanism on the holder. Without the rotating front element, the CPL is much easier to attach and remove compared to the previous system where the CPL had a front rotating element. The CPL's ultra thin design, which is constructed from ultra-thin Schott B270 glass and thin ring, reduces the occurence of vignetting at extreme wide angle. In addition, flat polished HD glass minimises refraction of light, thus minimising loss of resolution. Flare and chromatic aberration is reduced by the application of a 16-layer ULCA coating while polarised light is reduced by Japanese polarisation. The scratch resistant glass also receives a WMC coating to render the filter water and oil repellent for easier cleaner.

The 100x100mm Filter Frame from Benro is a spare or replacement, designed for use with the Benro Filter Holder. It allows you to slide your filters in to the slots in your filter holder by inserting the filter frames into their corresponding slots. To install your filter filter inside the frame, just press the circular column inside the round hole of the latch segment and pull out of the latch to change the filter. This filter frame is in addition to the two filter frames already included in the filter holder kit.

The Benro 82-72mm step down ring is designed for use with the Benro FH100 filter holder. In combination with a separately available 82mm adapter ring it will allow you to attach your filter holder to lenses with a 72mm diameter screw thread mount. The Benro 82-67mm step down ring is designed for use with the Benro FH100 filter holder. In combination with a separately available 82mm adapter ring it will allow you to attach your filter holder to lenses with a 67mm diameter screw thread mount.