+9 529 5055
B+W
72mm F-Pro SC ND Filter 3.0 (110)
Neutral Density Filter
This B+W Neutral Density Filter reduces the light by ten f-stops. It is well suited for the observation and documentation of scenes with extreme brightness and has a slightly warmer tone than the ND 106. The filter factor is 1000x.
Each glass surface is vacuum coated with one layer of Anti-Reflection coating. This single layer helps to prevent internal ghosting and reflections. It also improves light transmission from approximately 92% (uncoated glass) to over 98%.
This filter uses the standard B+W F-Pro filter mount, which has a front accessory thread and is made of brass. It can be used with wide angle lenses, including most 24mm focal lengths on a full frame body, without vignetting. Another advantage of the F-Pro mount is it's modified retaining ring, which is no longer threaded in from the front, but holds the filter glass in place from the back. When removing a filter or lens hood that has been screwed on too tight to the filter, the retaining ring is not at risk of loosening.