The Elinchrom D-Lite 400W/s RX 4 Flash Head is a lightweight, portable strobe. The auto-sensing, multi-voltage flash D-Lite RX 4 recognizes any AC power source from 90-260VAC, allowing power variability over 5.0 stops in 1/10 stop increments. Recycling is a lightning-fast 0.35-1.2 sec. (230V) with flash durations as short as an action-stopping 1/800 sec at full power. Although this head accepts a PC cord, it also has a built-in EL-Skyport Receiver with eight frequency channels that can handle four distinct groups of flashes. Separate purchase of the EL Skyport ELS Speed Transmitter allows you to trigger your flash at distances up to 393 and gives you control of power on/off, modeling light functions and Speed Sync activation. Free software for Mac and PC computers is also available, providing additional features such as Flash-Delay for strobing effects. Add an optional Wi-Fi module to the transmitter to use with apps that allow full remote control via your iPhone, iPad or iPod Touch. The D-Lite 400W/s RX 4s bayonet mount accepts all Elinchrom accessories and softboxes up to 135 cm.
Reflector not included
Basic Features
Built-in EL-Skyport receiver for triggering
8 Frequency channels with 4 groups
Speed Sync mode for synchronization up to a 1/320 sec. on enabled SLR cameras
Pre-Flash detector system to enable the use of D-Lite RX with speedlights
Power Auto-dump
5V sync socket for maximum protection of digital cameras
Automatic temperature controlled ventilation
Multi-voltage auto-detection: 90-260VAC (excluding modeling lamp)
Lightweight but strong housing. Robust, functional and elegant
Accessory bayonet accepts all accessories and Rotalux softboxes up to 53" (135 cm)
Rubberized large handle with spare fuse storage
Stand bracket with extra umbrella fitting for larger umbrella shafts
Enhancements
Take full control of your unit's settings with the optional EL-Skyport App for iPhone, iPad and iPod Touch via the optional WiFi module
Additional features such as Flash-Delay for strobing-effects can be accessed via the free EL-Skyport Software
Visual Flash Confirmation option. The modeling lamp comes on to confirm the flash has been triggered and goes off when recycling
Proportional adjustment of the modeling lamp
Variable f/stop steps: 1/1, 5/10, 4/10, 3/10, 2/10 or 1/10 steps are available
Programmable ready beep function
Firmware update option
