Benro A373FBS6PRO Aluminium 3-Sect Video Tripod + S6PRO Video Head

Description

The Benro A373FBS6PRO brings together the A373F Aluminium Single-Tube Tripod with the S6Pro Fluid Video Head to support your gear of up to 5.99kg. The A373F features a 75mm bowl and is supplied with a 75mm half ball adapter while the S6Pro Fluid Video Head features a 65mm flat base that attaches directly to the half-ball adapter. The 2-stage/3-section single-tube legs on the A373F are easily adjusted independentally with flip-locks into three positions, offering a versatile working height range of about 30cm to 160cm when the head is attached. With rubber and spike feet for support, the tripod is well-suited for use on a variety of surfaces. The complementary lightweight S6Pro head, part magnesium and part aluminium, features continuous pan and tilt drag, 5+0 steps of counterbalance, and independent pan and tilt locks. A pan bar that is attachable to either side of a rosette adapter is supplied, along with two camera screws--1/4"-20 and 3/8"-16--that are can cleverly stored in dedicated slots beneath the camera plate on the head itself. In addition, there is a 1/4"-20 threaded hole on each side of the head for attaching accessories such as articulating arms.

Camera Plate Features	Sliding Balance Plate
Camera Mounting Screw	1 x 1/4"-20 Male 1 x 3/8"-16 Male
Safety Lock	Yes
Base Mount	3/8"-16 Female
Counter Balance	Incremental 5-Step Plus 0
Pan Handle Fittings	2 x Rosette
Bubble Level	1 x Illuminated
Accessory Mounting	2 x 1/4"-20 Female Thread
Base Diameter	65 mm
Drag Control	Continuous Pan and Tilt
Drag Type	Fluid
Vertical Tilt	+90° to -75°
Panning Range	360°
Independent Pan Lock	Yes
Independent Pan Lock	Yes
Leg Lock Type	Flip Lock
Leg Sections	3
Feet Features	Rubber, Spiked
Load Capacity	5.99 kg
Maximum Working Height	160.02 cm
Minimum Working Height	29.97 cm
Materials	Aluminium, Magnesium
Weight	4.08 kg

Start with the customer â€“ find out what they want and give it to them.