The Benro A2573FS4PRO brings together the A2573 Aluminium Single Tube Tripod with the S4Pro Fluid Video Head for a fairly portable support with a compact and lightweight design that can support up to 3.99kg. Featuring a 60mm flat base and 3/8"-16 threaded hole, the head can be removed from the tripod and mounted directly on sliders, jibs, and other support gear. Thus, the combination of the head and single-tube legs that fold up neatly provides for a versatile system. The 2 stage/3-section aluminium tripod features a flat base center column with a levelling adapter that adjustment of the position of the fluid head is possible without readjusting the tripod legs. The column is also designed with a weight hook for sandbags and other loads that can hung off the hook for added stability. When the column is fully extended with the S4Pro attached, the tripod provides a maximum working height of almost 178cm; when the column is retracted the maximum height is 159cm. A minimum working height of 41.4 cm supports low angle shots. The flip lock legs allows individual leg adjustments into three positions. For use on varied surfaces, the tripod is designed with rubber feet and spikes. The lightweight and robust magnesium cum aluminium S4Pro head features fixed pan and tilt drag, 2-step counterbalance, and independent pan and tilt locks. A pan bar that is attachable to either side of a rosette adapter is supplied, along with two camera screws--1/4"-20 and 3/8"-16--that are can cleverly stored in dedicated slots beneath the camera plate on the head itself. In addition, there is a 1/4"-20 threaded hole on each side of the head for attaching accessories such as articulating arms.
Camera Plate Features
Sliding Balance Plate
Camera Mounting Screw
1 x 1/4"-20 Male 1 x 3/8"-16 Male
Safety Lock
Yes
Base Mount
3/8"-16 Female
Counter Balance
Incremental 2-Step
Pan Handle Fittings
2 x Rosette
Bubble Level
1
Accessory Mounting
2 x 1/4"-20 Female Thread
Base Diameter
60mm
Drag Control
Fixed Pan and Tilt
Drag Type
Fluid
Vertical Tilt
+90° to -75°
Panning Range
360°
Independent Pan Lock
Yes
Independent Tilt Lock
Yes
Leg Lock Type
Flip Lock
Leg Positions
3 Positions
Leg Sections
3
Feet Features
Rubber, Spiked
Center Column Features
Levelling, 3/8"-16 Female Accessory Mount
Load Capacity
3.99 kg
Maximum Working Height
177.80 cm
Maximum Height without Center Column Height
159 cm
Minimum Working Height
41.40 cm
Materials
Aluminium, Magnesium
Weight
3.04 kg
Start with the customer – find out what they want and give it to them.
Your Dynamic Snippet will be displayed here...
This message is displayed because youy did not provide both a filter and a template to use.
Second Battery
Battery Charger
Strap
Start with the customer – find out what they want and give it to them.
