Camera type |
Leica M-D (Typ 262), compact digital view and range |
Lens attachment |
Leica M bayonet with additional sensor for 6-bit coding |
Lens system |
Leica M lenses from 16 – 135mm |
Picture format/image sensor |
CMOS type, active area approx. 23.9 x 35.8mm |
Resolution |
5976 x 3992 pixels (24MP) |
Data format |
DNGTM (raw data), compressed loss-free, JPEG |
Buffer memory |
1GB |
Storage medium |
SD cards up to 2GB, SDHC cards up to 32GB, SDXC |
Exposure metering |
Ambient light: Through the lens (TTL), with working aperture, flash light: TTL metering with system-
compatible, SCA-3000/2-standard flash units |
Metering principle/method |
Metering the light reflected by light blades of the 1st shutter curtain onto a measuring cell: heavily center-
weighted |
Sensitivity range |
ISO 200 to ISO 6400, can be set manually in 1/3 ISO steps |
Exposure mode |
Choice of automatic shutter speed control with manual aperture preselection - aperture priority A, or manual shutter speed and aperture setting |
Flash unit attachment |
Via accessory shoe with central and control contacts |
Flash sync time |
1/180s; slower shutter speeds can be used if sync time is not met: automatic switching to TTL linear flash mode with HSS-compatible Leica system flash units |
Flash exposure metering |
With system-compatible flash units, control with center-
weighted TTL pre-flash metering |
Flash exposure compensation |
Flash units with the appropriate specifications: in all modes ±3EV in 1/3 EV steps |
Displays in flash mode |
Readiness: by means of constant lighting of the flash symbol LED in the viewfinder, success control: by further lighting or temporary fast flashing of the LED after the picture has been taken, underexposure display: by the LED going out temporarily |
Viewfinder principle |
Large, bright line frame viewfinder with automatic parallax ompensation |
Eyepiece |
Calibrated to -0.5 dpt.; corrective lenses from -3 to +3 diopter available |
Image field limiter |
By activating two bright lines each: For 35 and 135mm, or for 28 and 90mm, or for 50 and 75mm; automatic switching when lens is attached; frame color: white |
Parallax compensation |
The horizontal and vertical difference between the viewfinder and lens is automatically balanced by moving the bright-line frame in line with the relevant distance setting |
Matching viewfinder and actual image |
At a range setting of 2m, the bright-line frame size corresponds exactly to the sensor size of approx. 23.9 x 35.8mm; at infinity setting, depending on the focal length, approx. 7.3% (28mm) to 18% (135mm) more is recorded by the sensor than indicated by the corresponding bright line frame and slightly less for shorter distance settings than 2m |
Magnification |
(For all lenses) 0.68 x |
Large-base range finder |
Split or superimposed image range finder shown as a bright field in the center of the viewfinder image |
Effective metering basis |
47.1mm (mechanical measurement basis 69.25mm x viewfinder magnification 0.68x) |
Displays |
Four-digit digital display with dots above and below, displays |
Shutter |
Metal blade focal plane shutter with vertical movement |
Shutter speeds |
For aperture priority: (A) continuous from 60s to 1/4000s, with manual setting: 8s to 1/4000s in half steps, B: for long-time exposures up to max. 60s, (1/180s): Fastest shutter speed for flash synchronization, HSS linear flash mode possible with all shutter speeds faster than 1/180s with Leica system flash units with appropriate specifications |
Activation of shutter release button |
By integrated motor, low noise operation |
Shutter release button |
Two-stage, 1. Activation of exposure metering and exposure lock (in aperture priority mode), 2. Resolution |
Turning the camera on/off |
With main switch on the camera top panel, reactivation by touching the shutter release button |
Power supply |
1 lithium ion rechargeable battery, nominal voltage 7.4V, capacity 1800mAh.; capacity indicated in the viewfinder, operating conditions (in camera): 0°-40°C; Model No: BP-SCL2; Manufacturer: PT. VARTA Microbattery, Made in Indonesia |
Charger |
Inputs: 100-240V AC, 50/60Hz, 300mA, automatic
switching, or 12V DC, 1.3A; Output: Direct current nominal 7.4V, 1000mA/max. 8.25V, 1100mA; operating conditions (charging): 10°-30°C; Model No: BC-SCL2; Manufacturer: Guangdong PISEN Electronics Co., Ltd., Made in China |
Camera body Material |
All-metal magnesium/aluminum body, leather covering, brass top panel and base, black lacquered finish |
Tripod thread |
A 1⁄4 (1⁄4“) DIN stainless steel in bottom |
Operating conditions |
0°-40°C |
Interfaces |
ISO accessory shoe |
Dimensions (Width x Depth x Height) |
Approx. 138.6 x 42 x 80mm |
Weight |
Approx. 720g (with battery) |
Package Contents |
Charger 100-240V, lithium-ion rechargeable battery, carrying strap, housing bayonet cover, cover for accessory shoe |