Product: Profoto B1 500 AirTTL Location Kit
Product: Profoto B1 500 AirTTL Location Kit

Profoto B1 500 AirTTL Location Kit

Stock code: #901092

This product has been discontinued. Please contact us for more information

Profoto

B1 500 AirTTL Location Kit

Battery-Powered 2-Light Location Kit


The B1 500 Air Battery-Powered 2-Light Location Kit from Profoto consists of two B1 500 off-camera, battery-powered AirTTL flash heads, a 4.5A Fast Battery Charger, car charger and a custom location backpack. Add an optional Air Remote TTL-C, TTL-N, Air Remote or Air Sync for wireless triggering from distances up to 1,000'.

The B1 features a built in AirTTL receiver for remote triggering, as well as an on-board Lithium-ion battery to enable you to shoot on location without the need for a wall outlet. An included Fast Battery Charger provides up to 220 500W/s flashes on a 60 minute charge while the car charger allows you to refresh the battery while you drive to your next shoot. The kit fits in an included ballistic taylored nylon backpack and features padded interior compartments with room for expendables and optional Profoto transmitters. Currently the B1 offers full TTL exposure plus remote triggering for Canon cameras via the optional Air Remote TTL-C and for Nikon cameras via the TTL-N. The B1 can also be triggered remotely with the Air Remote or Air Sync without TTL functionality.

The B1 recycles in 0.1 to 1.9 seconds but can deliver up to 20 flashes per second in Quick Burst Mode which engages at lower power settings. Flash duration in Normal Mode is a very fast 1/1,000 sec. but there's also a Freeze Mode that delivers flash durations a short as 1/19,000 sec. for capturing liquid sprays or splashes and other creative effects. The modeling light has been upgraded to LED to put less strain on the battery and provide the equivalent output of a 70W tungsten-halogen bulb. The B1's exchangeable Lithium-ion battery gets up to 220 flashes on a 2-hour charge with the standard 2.8A charger or a 1-hour charge with the 4.5A Fast Charger. The battery has fuel gauge-type LEDs that make monitoring remaining power easy.

Profoto

B1 500 AirTTL Location Kit

Battery-Powered 2-Light Location Kit

Maximum Watt/Seconds 500W/s +/- 1/20 Stop
Guide Number 291 @ 6.56' (2.0 m), 100 ISO with Magnum reflector
Display LCD Indicators for:
Power in 1/10 stop increments
Battery charge level
Modeling light status
Recycle alert: Beep, Dim, Beep and Dim, silent
Sync: Slave, radio channel and group
Back panel control:
Modeling light button
Sync button
Test, On/Off button
Power dial
Flash Variability In 1/10 or 1 Stop increments 9.0 Stops:
2.0-10 power level (1/256-1/1)
2.0-500W/s
Recycle Time Minimum/Maximum: 0.1-1.9 sec.
Quick Burst Mode: 20 frames per sec.
Flash Duration Normal mode (t0.5): 1/11,000 - 1/1,000 sec. min/max power
Freeze mode (0.05): 1/19,000 - 1/1,000 sec. min/max power
Colour Temperature 5,600K
Normal mode:
+/- 150K over entire power range, +/- 20K flash to flash
Freeze mode:
+/- 800K over entire power range, +/- 50K flash to flash
Beam Angle 77 Degrees with built-in reflector and opal protective glass
Modeling Light 20W LED (70W tungsten equivalent)
Replaceable by service tech.
Modeling Light Control Off / Proportional / Free (full) 5.0-100%
Wireless Remote Yes, via optional Air Remote TTL-C/N, Air remote, Air USB (Profoto Studio) Wireless range:
Up to 1,000' (300 m) for normal triggering
Up to 330' (100 m) for TTL with optional Air Remote TTL-C
Frequency Band 2.4 GHz
Triggering Air radio slaves, optical (IR), sync cord
Operating Voltage 100-240VAC, 50/60Hz, Self-sensing
14.8VDC/3Ah via included, rechargeable battery
Auto Power Off Yes, after 60 minutes of disuse
Sleep mode after 30 minutes of disuse
Battery Type Lithium-ion
220 Full power flashes Battery life: 300 charge cycles (to 80% left)
Flash Ready Indicator Beep tone, ready right, modeling light dimming
Battery Charge Time 2.0 Hours with included 2.8V multi-voltage charger
1.0 Hour with optional 4.5V quick charger
Battery Charge Display Green LED indicators: 3 Sections: 100-70%
2 Sections: 70-40%
1 Section: 40-10%
1 Section blinking
< 10%
User Replaceable Flashtube No, via authorized service tech.
Voltage Stabilization Yes
Circuit Protection Adaptive thermal control
Fan Cooled Yes
Auto Dump Yes
Operating Temperature 14 to +122°F (-10 to +50°C)
Storage: 4 to +140°F (-20 to +60°C)
Dimensions Length x diameter:
Body only: 310 x 130 mm
With 5/8" (16 mm) stand adapter: 310 x 170 mm
Weight 3.0 kg Including battery

@progearphoto - FOLLOW US ON INSTAGRAM

We love to see your photos! Hashtag #progearfeature for your chance to be featured