D-Lite RX ONE/ONE Softbox To Go Set
Studio Flash Set
The Elinchrom D-Lite RX One/One Softbox To Go Kit is a quality core or starter kit for portraits or products at home or on location. The kit includes 2 D-Lite RX One 100Ws Flash Heads with built-in wireless EL-Skyport receivers, 90-260 VAC multi-voltage capability and a 0.5 to 2.1-second recycling time. A 16-channel EL-Skyport Transmitter Plus is included for wireless triggering up to 656'. Portalite 26x26" and 22" Octa softboxes are also included to soften the light's output. The kit is rounded out by 2 light stands, a 16' sync cable, and a tube case for the lights.
The Elinchrom D-Lite RX One Flash Head is a 100W/s auto-sensing, multi-voltage monolight that recognises any AC power source from 90-260VAC, allowing power variability over 5.0 stops in 1/10 stop increments. Recycling is a fast 0.5-2.1 sec. (@115V) with flash durations as short as an action-stopping 1/1,100 sec at full power.
The D-Lite RX One is packed with professional and convenience features usually found in flash heads twice its price. Although this head accepts one, you won't need a PC cord. It has a built-in EL Skyport Receiver with 8 frequency channels that can handle 4 distinct groups of flashes. Separate purchase of the EL Skyport Speed Transmitter not only allows you to trigger your flash at distances up to 393' but gives you control of power on/off, modelling light functions and Speed Sync activation. Free software for Mac and PC computers is available, providing additional features such as Flash-Delay for strobing effects. Add an optional WiFi module to the transmitter and you can use specially designed apps that allow full remote control from your for iPhone, iPad or iPod Touch.
D-Lite RX One's bayonet mount accepts all Elinchrom accessories and softboxes up to 53" (135 cm). It comes with a power cord with a U.S. plug, sync cord, flash tube and protective cap. The included 115V 100W modelling lamp must be swapped out when using the unit in nominal 230V electrical environments.