+9 529 5055
Lee Filters
100mm Adapter for Nikon PC-E NIKKOR 19mm f/4E ED Tilt-Shift Lens
Adapter ring
The Lee 100mm Adapter for Nikon PC-E NIKKOR 19mm f/4E ED Tilt-Shift lens is an aluminium alloy adapter ring designed to allow a separately available 100mm Filter Holder to connect to a Nikon PC-E NIKKOR 19mm f/4E ED tilt-shift lens. This allows 100mm-wide, 2mm-thick filters to be used.
It is built with three different ring components - a front ring, a compression ring, and a locking ring. The front right slides easily over the front of the lens, and the compression and lock rings slip over the rear of the lens until they meet the front ring, where they can be attached to each other. When fitted, these form a collar that remains on the lens at all times.
Please note that adapters are available for both the SW150 and 100mm Systems. This 100mm adapter will not allow full lens movement without vignetting.