Benro

FH100M2 Long Exposure Kit

Includes a Filter holder set, Filter case, 4 Filters, 2 Stepdown rings and a Filter frame

The FH100M2 Filter Holder from Benro is an updated version of their original FH100 holder. Like the original FH100 holder, it is designed to hold both square and circular filters, with the ability to freely rotate an attached 82mm CPL filter after installation. It will hold up to 3 square filters, and ultra-thin 82mm CPL simultaneously, without creating vignetting on lenses as wide as 16mm.

Add your square filters by inserting them into filter frames, and then sliding them into their corresponding slots in the filter holder. This kit comes with one 100x100mm filter frame, and one 100x150mm filter frame. Additional filter frames are available separately. If you want to replace the filters inside the gradient frame or ND frame, just press the circular column inside the round hole of the latch segment and pull out of the latch to change the filter. To adjust the gradient filter up and down, simply drive the gradient filter knob to select the desired gradient filter. Twist the knob to adjust the position of the gradient.

The Case for 100mm Filters and Holder from Benro is a filter bag designed for use with 100mm square filters. It offers space for up to 4 100mm square filters, 3 round filters, and your 100mm filter holder. Mesh pockets offer space for additional small accessories, and there is a dedicated space for your SD cards inside a small inner pouch.

This Benro Hard Grad 0.6 ND filter is a 100x150mm 2 stop graduated neutral density filter with a hard transition from being transparent on one end to being light-stopping on the other. This makes it a good choice when working with a horizon line or scenes where there is a hard transition between sky and foreground.

This ND64 WMC 100x100mm Filter from Benro is a 6 stop neutral density long exposure filter designed to reduce all different wavelengths of light for an even 6 stop reduction in light. This allows your shutter speed to be slowed significantly, which is particularly useful when photographing water and tides, or when a dramatic effect is desired.

This ND1000 WMC 100x100mm Filter from Benro is a 10 stop neutral density long exposure filter designed to reduce all different wavelengths of light for an even 10 stop reduction in light. This allows your shutter speed to be slowed significantly, which is particularly useful when photographing water and tides, or when a dramatic effect is desired.

The 82mm Master CPL from Benro is a circular polariser filter dedicated for use with the Benro FH100M2 Filter Holder. Unlike standard CPL filters, the 82mm Master CPL does not have a rotating front element, and the rotation is achieved by a mechanism on the holder. Without the rotating front element, the 82mm Master CPL is much easier to attach and remove compared to the previous system where the CPL had a front rotating element.

This 100x100mm Filter Frame from Benro is a spare or replacement, designed for use with their separately available FH100M2 Filter Holder. It allows you to slide your filters in to the slots in your filter holder by inserting the filter frames into their corresponding slots. To install your filter filter inside the frame, just press the circular column inside the round hole of the latch segment and pull out of the latch to change the filter.

This Benro 82-72mm step down ring is designed for use with the Benro FH100 filter holder. In combination with a separately available 82mm adapter ring it will allow you to attach your filter holder to lenses with a 72mm diameter screw thread mount. The FH100 holder is sold separately.

This Benro 82-67mm step down ring is designed for use with the Benro FH100 filter holder. In combination with a separately available 82mm adapter ring it will allow you to attach your filter holder to lenses with a 67mm diameter screw thread mount. The FH100 holder is sold separately.

This Long Exposure Kit contains:
FH100M2 holder (incl FR1010, FR1015, 77mm and 82mm adapters)
FB100M2 case
0.6 Hard Grad
6-stop ND
10-stop ND
CPL Filter
FR1010 Frame
82-72mm Stepdown ring
82-67mm Stepdown ring