Micro Sync
TX/RX
Mono Plug Kit
Small, intelligent wireless solution for firing strobes and
cameras.
Whether you're in the studio or on location, firing strobes with
a sync cord can be difficult. The MicroSync digital wireless strobe
sync system allows you to fire strobes wirelessly.
Simply place the transmitter in your camera's hot shoe, put the
receiver into your strobe's power pack and fire.
There are no on/off switches on the transmitter or receiver.
When you pressthe shutter the transmitter turns itself on, sending
the signal to the receiver, then turns itself off.
Four channels allow you to shoot without interference from other
MicroSync users in close proximity.
Transmitter
|
Batteries Approximate Life
|
CR203 2/3 years |
| Plugs |
Hot shoe |
| Ports |
Sub-mini photo input 2.5mm |
| Size |
27 x 51 x 11mm |
| Weight (incl batteries) |
15g |
| System Requirements |
Universal Hot shoe or PC
terminal |
| Max Range |
100 ft |
| Max Sync Speed |
Focal Plane 1/180 sec & Leaf
Shutter 1/350 sec |
| Channels |
4 |
| Frequency |
433MHz |
Receiver
Batteries Approximate Life 2xAA 1 year
Plugs Mono plug or household plug
Ports Sub mini phono output 2.5mm
Size 35 x 111 x 22mm
Weight (incl batteries) 100g
System Requirements Powerpack or monolight with
sync voltage less than 60 volts
Max Range 100ft
Max Sync Speed Focal Plane 1/180 sec & Leaf
Shutter 1/350 sec
Channels 4
Frequency 433MHz